Tag: roofing maintenance

Repairing Your Home’s Roof


Your roof is your home’s defense against rain, hail, and flying debris. It’s not infallible, however, and it will eventually need a little TLC.Roof

The best time to fix a damaged roof is before it starts to leak. Look for stains, sagging or a musty smell in your home. Visit https://redstickroofing.com/ to learn more.

A bad storm can cause serious damage to your roof, leaving behind shingles that need to be replaced. The good news is that repairing this kind of damage doesn’t always mean replacing your entire roof. Replacing a single shingle is relatively easy, and the process can also give you a chance to inspect your roof for other problems.

Before you start your repair job, make sure that you have all the necessary tools and safety equipment. A ladder, safety harness and shoes that won’t slide are all a must. You should also check that your roof vents are working properly. If they are damaged, it could lead to water stains in your home’s interior and higher energy bills.

If you spot any shingles that are loose or missing, it is important to address the issue promptly. Missing shingles can leave your roof vulnerable to water and pests, while sagging shingles can cause structural damage to your roof. Start by performing a thorough inspection of your roof from the inside — get up into your attic or crawlspace, whatever it takes to look directly under the roof. If you can safely do so, take high-res pictures of any damage and write down your findings.

When a shingle is damaged, it may have a small hole in the middle or be torn in half along its edge. It is important to replace the damaged shingle with a new one, or moisture and other weather elements can infiltrate your roof and cause further damage.

Once you find the location of a damaged shingle, carefully pry up the layer of shingles that are over it. Then, using a flat pry bar or catspaw, lift the shingle that is damaged and expose its nails. Carefully pull out the old nail, and then use a carpenter’s square and marker to draw a line around the damaged section of your shingle. This will help you cut the shingle to a precise length when you replace it.

While you are removing your damaged shingle, it is a good idea to replace all of the other shingles that are exposed on that row. It is also a good idea to replace the nails on undamaged shingles that aren’t covered by the shingle above them. This will protect your roof from leaks and prolong the life of your shingles.

Leaking Gutters

Gutter leaks can cause a lot of damage to your home. Often they are the source of water damage in your foundation, siding, basement and other areas of your home. Leaking gutters can also lead to rotting fascia boards and sagging gutters that pull away from your house. Look for signs of leaking gutters such as stains on your walls and walkways and puddles around your house after rainy weather.

Gutters are attached to the fascia board of your roof with a variety of fasteners. Over time the fasteners can loosen causing the gutters to sag. The sagging will shift the channels of your gutter system so that water doesn’t flow through them correctly, causing a leak.

If you have metal gutters with rust holes in the corners, you may be able to get them repaired by using copper sealant on the leaky spots. This will help to fix the hole and prevent future leaking. However, if the gutters are beyond repair you will need to replace them with new ones.

Plastic gutters are prone to developing leaks in the joint areas of the sections. This is caused by dirt and debris that accumulates in the joints of the gutters causing them to loosen and leak. This can be easily fixed by performing a cleaning service for your gutters and then applying a waterproof gutter sealant to the joints of each section of the gutter.

Another common reason for leaking gutters is that they have an improper slope towards the downspout. This can be due to poor installation or loose gutter fasteners. To fix this you will need to re-hang the gutters with a proper slope to ensure that water flows properly.

It is important to inspect your gutters regularly to make sure that they are not clogged or leaking. If you do find a problem, make sure to address it right away to avoid expensive water damage to your home. It is also important to check downspouts to make sure that there are no blockages keeping the water from flowing freely away from your home.

Damaged Built-Up Roofing (BUR)

Built-up roofing, or BUR, is an older style of commercial roof that’s still used on some buildings. It’s a highly durable flat roof that can last for decades, but like all flat roofing systems, it requires inspections and repairs on a regular basis to avoid costly damage and replacement.

The multiple layers of a BUR system provide excellent weather and water resistance. However, that means the roof is much heavier than single-ply membranes and can put a strain on the building structure, particularly if there’s a lot of foot traffic on the roof.

It’s important to understand the risks of a BUR roof so you can make the right choice for your building. It’s a good idea to work with an experienced contractor when choosing this type of roof for your building.

BUR roofs have many advantages, including long-lasting and excellent fire resistance. They also provide superior insulation, cutting energy costs throughout the year. Today’s modern BUR systems also include a layer that reflects sunlight, further cutting energy costs.

There are a few different ways you can repair a damaged BUR roof, depending on the size of the repair and extent of the damage. Some methods may be more expensive than others, but it’s important to take the time to evaluate your options and choose the best one for your needs.

Some common issues that can be repaired on a BUR roof include open joints, blistering, waves and cracks. These are usually the result of heavy wear and tear, poor installation or rough weather/climate.

Another common issue is leaking at seams and flashing. These areas are more prone to leaks because they move and expand as the roof flexes during heating and cooling cycles. These areas should be inspected regularly, and leaks should be addressed immediately as they can lead to serious interior problems.

Regular maintenance and inspections can prevent a lot of these problems from occurring, so you should always have a trusted, experienced roofer perform the work. In addition, you should make sure your building is inspected after any severe weather to check for damage.

Damaged Flashing

Flashing is the thin metal strips that bind areas of your roof together, such as around chimneys, dormers and roof windows. The areas where these meet and connect are vulnerable to water leaks, so the quality of the flashing is crucial. Fortunately, damaged flashing is usually easy to repair.

Leaks can have a serious impact on your home, particularly if they get into an attic. Moisture can cause wood to rot and even weaken the basic framing of your home. If you don’t catch these issues early and act quickly, they can lead to serious structural damage to your home.

In many cases, you can spot the source of a leak in your roof flashing by finding moisture spots or visible deterioration. It’s also helpful to keep up with regular roof inspections, so you can see any issues that may develop.

Damaged flashing is typically caused by age or exposure to the elements. Temperature changes can cause the flashing to warp and develop a wrinkled appearance, which can allow water to penetrate the roof seams. Additionally, your house foundation settling can cause flashing to loosen or shift.

Depending on the severity of the damage to your roof flashing, it may be necessary to replace the damaged pieces. Roofing experts can carefully remove the old flashing and install new flashing, ensuring that it seals properly and covers any vulnerable areas.

In some cases, it is possible to repair small gaps or minor damages in your roof flashing using flashing tape. However, it is important to remember that this is only a temporary fix. You will need to have a professional roofer come out and repair the damaged roof flashing for long term protection.

Attempting to do roof flashing repairs without any prior experience can be a dangerous endeavor. Not only can you risk causing further damage to your roof, but you could seriously injure yourself. Attempting to do roof flashing repairs can also be difficult since you need to remove your shingles, access the area and then reinstall them afterward. Without the proper skills, tools and knowledge, you can end up causing more damage to your roof than you started with.